WA7475 - Standard Red Chevrolet Touch Up Paint

The Look

This red was not designed for a sports car; it was made for the job site. Found on the 2007 Kodiak, this shade is about visibility and authority. Because your truck likely spent its life working outdoors, the original finish has probably taken a beating from the sun. Red pigments are notorious for losing their punch and turning chalky if they are left unprotected. Your goal here is about restoring a sense of industrial strength to a body that earned its keep. Since your Kodiak has been on the road for over fifteen years, expect the new paint to look much deeper than the weathered panels surrounding it.

Technical Details

This is a solid finish, meaning there are no metallic flakes or pearls to hide behind. Solid reds are honest. They offer deep, consistent coverage, but they also show every ripple in the metal. Since there is no sparkle to distract the eye, you must be precise. The main risk with a solid red is the contrast between the new, vibrant pigment and the older, oxidized paint. Clean the work area with a wax remover to see the true shade of the truck before you begin, or the difference will be obvious once you finish.

Best Practices

You will find your paint code on the silver Service Parts Identification sticker, typically located inside the glove box. Before you apply Chevrolet Standard Red (verify you have code WA7475), shake your container for at least a full minute. Red pigments are heavy and settle at the bottom of the reservoir. Test the color on the included card to see how the tone sits against your current finish. When you start the repair, keep the container moving to avoid puddles or drips. Give the paint plenty of drying time between layers so you do not trap moisture, which can cause the finish to look dull or stay soft. Work in a garage or the shade to keep the metal cool while you work.