Find your Buick paint color by clicking your vehicle's year:
Find your Buick paint color by clicking your vehicle's model:
Find Your Buick Color and Buick Paint Code
Buick did not make it easy to find the color code. Through the years, they have tried so many different locations, it often makes it impossible to ever find it. Plus, their paint code format is confusing. GM (parent company of Buick) make so many makes and models, you would think they would have standardized the location of the color plate. No such luck.
Usually when someone has trouble finding a Buick paint code, I have them look in the glove box or the spare tire well. If this doesn't work, then you start looking everywhere for it.
The typical color code format is:
and this is usually preceded by BC/CC. So the above color would be BC/CC 51 or BC/CC 316N. You will notice our listings all have a WA in them because this is how they are listed in our color information. Also, there are really two codes in each color code to make it even more confusing. There can be eighteen different code 51's so then you have to use the 316N to identify the color. Also, these codes can be preceded by a U or L which correspond to Upper and Lower color. See below under two tone for more information.
Again, I ask...who was in charge of this??
which corresponds to Slate Gray Metallic Clearcoat.
Two Tone Combination
Buick has many two tone combinations for some cars. Two tones are two different colors on your car. If your car has two colors, you will see the two tone color code. Using the above example, the code could be listed as:
BC/CC U316N or BC/CC L316N The U stands for Upper Color and the L stands for the Lower Color. Again, just a confusing way to present color information.
Same Color Code, Different Name
Buick, like all manufacturers, uses the exact same color across many models and then will have a different color name for each model. It's the same paint! This is why the color code is so important to order the correct paint.
For example, 316N above we call Gold Mist Metallic Clearcoat It could also be called Gold Clearcoat, Inca Metallic Clearcoat, etc. depending on what the marketing department decided to call it.
How To Repair Damaged Buick Paint With Buick Touch Up Paint
By following these Buick paint repair directions, you can make your Buick paint shine again! For more detailed instructions, including how to use Buick spray paint, see our Directions for How To Apply Touch Up Paint.
1. Prepare Your Buick for Touch Up Paint
Make sure the temperature is over 50 degrees F, then wash the damaged paint on your Buick with soap and water. Use a wax and grease remover on the area. Placing masking tape around your scratched Buick paint will help protect the surrounding auto paint.
2. Repair Rusted Areas Before Applying Buick Touch Up Paint
Remove all traces of rust from your Buick with 220 grit sandpaper or a wire brush. Then use rust converter and apply it to the rusted area of your Buick.
3. Apply Primer Before Painting Your Buick
If you have an unpainted surface on your Buick, like bare metal or plastic, apply primer before Buick touch up paint! Apply several thin coats of primer to the Buick paint you are going to repair. Only apply a small amount of primer to your Buick at time. Let the primer dry, overnight if possible, before applying the Buick touch up paint. Once dry, lightly sand the primed Buick paint area with #220 grit sandpaper followed by #600 wet and dry sandpaper.
4. How to Apply Buick Touch Up Paint
You are now ready to apply Buick touch up paint to your car. Apply several thin coats of Buick touch up paint to build up the damaged paint area to the same depth as the surrounding surface. Let the Buick paint dry for ten to twenty minutes between coats. After the final coat, let the paint dry thoroughly before applying a clearcoat layer. Usually if you let the Buick paint dry overnight, it will be dry. If temperatures are below 70 degrees F, allow additional time for the Buick touch up paint to dry.
5. Protect Repaired Buick Paint with Clearcoat
Make sure the Buick touch up paint you applied earlier is dry. Apply several thin coats of clearcoat over the touched up Buick paint, drying for ten to twenty minutes between each coat. Let the clearcoat dry overnight, or longer if temperatures are less than 70 degrees F.
6. Use Rubbing Compound to Make Your Buick Paint Shine
Rubbing compound will help your Buick touch up paint repair become smooth and shiny like the original paint. Let the clearcoat dry for at least three days, then use rubbing compound on your Buick. Apply rubbing compound to your Buick paint with a clean, soft cloth like an old tee shirt, but not wood products like paper towels. Place a small quantity of rubbing compound on the area where you applied Buick touch up paint. Use circular strokes while applying even pressure to the surface. Buff with a clean cloth to a high gloss. For best Buick touch up paint results, let your Buick's finish dry for thirty days and then apply a good quality automotive wax.
Buick Touch Up Paint Pens, Spray Paint, and Other Buick Paint Products
Once you are ready to repair your Buick with touch up paint, you need to decide which Buick paint repair products to order. Buick touch up paint pens are great for small and quick Buick paint jobs, while Buick spray paint is better for repairing larger areas. 2 oz. Buick basecoat paint bottles work well if you have many Buick paint chips to fix. You can find more information about which Buick touch up paint products to order here.