Home Calendar Search Register Login
 Welcome, Guest. Please login or register

Forum Login
Username: Register
Password:     Forgot Password

  PaintScratch Touch-Up Paint    General Boards    Clearcoats  ›  sanding trough clearcoat
0 Members Browsing (1 Guests)
Currently No Active Members

Pages: 1 Reply Recommend Print
  Author    sanding trough clearcoat  (currently 1 views)
RXR
Posted on: April 17th, 2005, 3:31am Quote Report to Moderator
Guest User
When detaileing a new to me Porsche 993 I found fish eye on a rear quarter panel. I used 2500 wet sandpaper to try and sand it out and bingo...I went through the clear.  I now am thinking of using your spray can clear to re-clear the 1" diameter spot. What would be the best approach.
If this doesn't work I'll take it to a professional and have the entire panel re-done. 
Logged
e-mail
admin
Posted on: April 20th, 2005, 6:20am Quote Report to Moderator
Team Member Administrator


Posts: 326
You really should apply some basecoat to the area where you went through and then use clear over that as this is the correct way to do it. I have never just sprayed clear by itself as you will not get a nice finish.
Logged
e-mail Private Message Reply: 1 - 3
RXR
Posted on: April 20th, 2005, 7:59pm Quote Report to Moderator
Guest User
So I should rough up the surface around the damaged area (say 4-5") with 800 grit, blend in some basecoat, let it set up, and then spray clear over it?
I'm afraid of using 800 on the spot itself as I don't want to get to the primer if at all possible.

Would you mask it off, use the spray through the hole technique or just "do it".

Thanks
Logged
e-mail Reply: 2 - 3
admin
Posted on: May 5th, 2005, 5:15pm Quote Report to Moderator
Team Member Administrator


Posts: 326
Yes, scuff the area. I would not mask it off, just spray to a  panel so you don't leave a clearcoat edge in the middle of a panel.

Last modified May 5th, 2005, 5:22pm by admin
Logged
e-mail Private Message Reply: 3 - 3
Pages: 1 Reply Recommend Print

New Thread New Poll PaintScratch Touch-Up Paint    Clearcoats  [ previous | next ] Switch to:

Quick Reply
 

Forum Rules
You may not post new threads
You may not post replies
You may not post polls
You may not post attachments
HTML is off
Blah Code is on
Smilies are on

Powered by e-blah Platinum 5 2001-2004   -   December 5th, 2016, 1:35am