PaintScratch Touch Up Paint  ›  Paint Help  ›  blending new paint into the car
Topic Started by:
Printable Version

Posted by: jrob Posted on: August 27th, 2005, 10:00am

Hi, I want to mold my fender flares onto the body of my car but i dont know how exactly to do it. I know i have to sand the areas or else the bondo wont stick on the surface good. The car is a 2004 so the existing paint is still strong and good. What grit sand paper should i use around the fender flare area? And should i use primer with flex additives? the fender is metal but the flare is urethane. Thanx for your help.

Posted by: admin Posted on: September 5th, 2005, 4:32pm
Reply: 1

Usually you sand bondo with 80 grit to start and then finish out with 220. You should use a primer with flex on the area as it will stick to both.

Posted by: dougneal31 Posted on: September 7th, 2005, 11:37pm
Reply: 2

how do I blend the adjacent panels?  the technique?

Posted by: admin Posted on: September 19th, 2005, 5:22am
Reply: 3

see for complete directions.

» Print page generated: May 23rd, 2018, 4:24pm «
Powered by e-blah Platinum 5 � 2001-2004